Two-Hour Controller Programming Minimum
Required programming/configuration minimum for applicable JACE, JENEsys Edge, or controller purchases. Final scope depends on project requirements.
Add to CartDroMetrics-backed BAS support
BAS Programming, Configuration, and Project Support
DroVault helps contractors source the parts. DroMetrics helps support the BAS work behind them. Request programming, configuration, BOM review, Niagara support, reporting, startup assistance, and contractor backstop services tied to your parts or project scope.
BAS contractor-focused supportBuilt around field and project workflows.
Niagara/JACE support availableStation, controller, and integration help by scope.
Programming and configuration optionsFixed blocks or request-based review.
Quote review before specialty fulfillmentScope, parts, and acceptance are confirmed.
Lynxspring Dealer Support
Lynxspring® / JENEsys® Controller Sourcing and Support
DroMetrics is a Lynxspring dealer. Through DroVault, contractors can request Lynxspring/JENEsys controller options along with programming, configuration, integration planning, reporting, startup assistance, and BAS support tied to the project scope.
- JENEsys Edge® controller packages by request
- Niagara-based configuration and programming support
- BACnet, Modbus, graphics, alarms, trends, and startup support by scope
- Quote review before specialty fulfillment
Programming & Configuration
Controller setup, point mapping, graphics, alarms, histories, and integration support.
Additional Programming Hour
Add programming/configuration time for point mapping, sequence edits, graphics support, alarm setup, trend setup, or integration assistance.
Request ScopeJACE / JENEsys Edge Initial Configuration
Basic setup support for controller identity, network settings, licensing coordination, station organization, and project-ready configuration.
Request ScopeBACnet / Modbus Integration Support
Support for connecting BACnet/IP, BACnet MS/TP, or Modbus devices into a Niagara-based project.
Request ScopeGraphics, Alarms & Trends Setup
Add practical BAS visibility with graphics, alarm routing, histories, and trend setup tied to the project scope.
Request ScopePreconfigured Controller Packages
Pair controller purchases with project-specific setup, naming, configuration, integration planning, graphics, alarms, trends, and startup readiness.
JACE Preconfiguration Package
Prepare a JACE package around station structure, network settings, driver planning, naming, and startup readiness.
Request ScopeJENEsys Edge Preconfiguration Package
Request project-specific setup support for JENEsys Edge controller identity, point organization, licensing coordination, and integration planning.
Request ScopeMechanical Room Controller Setup
Scope naming, point organization, equipment grouping, graphics, alarm needs, and trend setup for mechanical room control work.
Request ScopeAHU Controller Configuration Package
Request support for AHU-oriented controller setup, sequence review, point mapping, alarm planning, and startup notes.
Request ScopePump / VFD Control Package
Scope pump or VFD control setup with network details, status points, command points, alarm needs, and trend requirements.
Request ScopeBOM & Project List Support
Organize lists, identify missing details, flag substitution concerns, and route the request toward parts, quote review, or support.
BOM Cleanup & Parts Review
Send a list that needs cleanup, grouping, quantities, missing detail checks, or quote-path review.
Send BOM / Project ListBAS Material Takeoff Review
Request review of takeoff notes, plans, schedules, and supporting documents before parts sourcing.
Request ReviewSubstitution / Alternate Review
Flag possible alternate products, compatibility questions, and project concerns before acceptance.
Request ReviewControls Schedule Review
Send controls schedules or equipment notes for part mapping, missing information, and sourcing review.
Request ReviewReplacement Part Help
Upload part numbers, model numbers, labels, panel photos, actuator tags, valve details, voltage, control signal, or field photos.
Find a Replacement Controller
Send controller photos, model numbers, point counts, network details, and existing BAS context for review.
Submit RequestFind a Replacement Sensor
Share sensor labels, wiring, ranges, signal type, mounting needs, and field notes.
Submit RequestFind a Replacement Actuator
For Belimo-specific actuator or valve help, include tags, voltage, control signal, valve size, Cv, and fail-safe needs.
Submit Belimo RequestLegacy Part Cross-Reference Request
Send legacy part numbers, labels, panel photos, or prior submittals so the request can be reviewed.
Submit RequestPhoto-Based Part Identification
Upload clear photos of labels, wiring, terminals, panel context, and equipment tags for review.
Submit RequestNiagara Station Services
Station organization, alarms, histories, device status, overrides, naming, backup readiness, upgrade planning, and operator readability.
Niagara Station Health Check
Request review of station organization, device status, alarms, histories, overrides, and operational readability.
Request ScopeStation Backup Review
Review backup readiness, station files, naming, and support notes before service or upgrade work.
Request ScopeJACE Upgrade Planning
Plan controller replacement, Niagara version needs, driver concerns, point counts, and migration questions.
Request ScopeAlarm Cleanup Package
Scope alarm routing, priority cleanup, nuisance alarm review, and operator-friendly alarm organization.
Request ScopeTrend Cleanup Package
Review histories, intervals, stale data, naming, and trend usefulness for operators and contractors.
Request ScopeGraphics Cleanup Package
Improve graphics organization, naming, navigation, and operator readability by reviewed scope.
Request ScopeReporting & BAS Visibility
Help operators and contractors see out-of-range points, down devices, faults, stale values, overrides, and useful Niagara reporting.
Operator Report Pack
Request practical reports for operator review, contractor follow-up, and project visibility.
Request ScopeOut-of-Range Report Setup
Scope reports that highlight temperatures, pressures, humidity, or other values outside useful operating ranges.
Request ScopeDown / Fault / Stale Report Setup
Identify down devices, faulted points, stale values, and communication issues for follow-up.
Request ScopeOverride Report Setup
Track manual overrides, operator changes, and points needing review.
Request ScopeBQL / NEQL Query Pack
Request Niagara query support for practical lists, reporting, and system review workflows.
Request ScopeStartup & Commissioning Support
Controller startup, point checks, verification, troubleshooting, technician backstop, issue tracking, owner demonstration, and closeout.
Remote Startup Support Block
Request remote startup assistance for point checks, controller setup, troubleshooting, and field technician support.
Request ScopeOnsite Startup Support Request
Scope onsite support needs, timing, equipment, access, travel requirements, and closeout expectations.
Request ScopeFunctional Test Support
Request support for test scripts, point verification, issue review, and field follow-up.
Request ScopeDeficiency Log Setup
Organize startup issues, open items, responsible parties, and closeout notes.
Request ScopeOwner Demo / Turnover Support
Scope operator walkthroughs, reporting support, graphics review, and turnover-ready BAS notes.
Request ScopeContractor Remote Support Blocks
Remote BAS help for issue review, troubleshooting, project support, and retainer-style backstop needs.
Remote BAS Support Hour
Use for clearly defined remote BAS support tasks where a fixed one-hour block fits the need after review.
Request SupportTwo-Hour Troubleshooting Block
Request a focused troubleshooting block for defined Niagara, controller, integration, or reporting issues.
Request SupportFour-Hour Project Support Block
Use when project notes, station review, integration planning, or issue cleanup needs a larger scoped block.
Request SupportRemote Bench Retainer Inquiry
Ask about recurring remote backstop support for contractor projects, troubleshooting, and BAS review.
Request Retainer InfoNeed help deciding what support fits the project?
Send the parts list, project notes, controller requirements, or BAS issue. DroVault will route the request toward parts, quote review, programming support, or DroMetrics-backed BAS services.